 |
|
The App
At the time of this review, Combustion has not released its full blown App yet. What they have released is a sort of a
place-holder demonstration App that can update the firmware, display temperature readings from the probes, and allow you to
do a simple cook by specifying a target meat temperature. Here is what the basic App looks like:
 1. This is the opening screen where the App listens for probes to appear. |
 2. Once they do appear, the probes will be listed on a screen that shows the core, surface and ambient temperatures. |
 3. You can swipe left on any probe's readings and the App will show you its instant-read value. |
 4. You can tap on the "Predict" button to be taken to a screen where you can enter a target meat temperature. |
 5. Here you can enter a temperature and then tap on the "Begin Prediction" button to start cooking. |
 6. That takes you to this screen where you are shown the progress of the cook. |
 7. You can swipe left on the probe that is cooking to see the core, surface and ambient temperature readings. |
 8. On any screen you can tap on the little flame icon at the top right of the display to be taken to the firmware update screen. |
 9. We have already shown you the firmware update process that you can start from this screen. |
Cooking Options
At this point, the App doesn't contain any options for selecting different cuts of meat. For now, you need figure out
your target temperature and enter it when you start a cook.
You can support this website by shopping at The Naked Whiz Website Store and Amazon.com
|
